Step 1:

Take the printer and accessories out of the box and confirm that the accessories are complete.

Step 2:

Use the diagonal pliers included in the accessories to cut the cable ties that secure the machine.

Step 3:

Remove the foam from the machine and rotate the z-axis to raise the nozzle for easy operation.

Step 4:

Lay the machine on its side, align it with the holes of the gantry, and use the screws in the accessory bag ③ to fix the gantry and the base.

Step 5:

Refer to step 4 to fix the other side of the gantry.

Step 6:

Place the power supply on the left side of the printer, aligning with the mounting holes on the gantry.

Step 7:

The instruction manual indicates that the screws in the accessory bag ② are used to fix the power supply.

Step 8:

Connect the printer to the power source.

Step 9:

Assemble the filament rack and rod.

Step 10:

Use the screws in the accessories bag ① to fix the filament rack and rod.

Step 11:

Use the screws in the accessory bag ① to install the assembled rack on the gantry, and the assembly is now completed.