Zhuhai Sunlu Industrial Co., Ltd.

Dryer Box User Instruction

Turn on the power:
Plug the 24V/2A power adapter that came with the product into a power outlet, and then connect the wire to the DC outlet of the filament dryer box. Before the drying box is powered on, there is no key operation, and the dryer box is in a standby mode (no heating).
Filament drying:
Put the filament into the dryer box and pull the filament cord out of outlet. Close the top cover, press any key(left or right), the dryer box will be heated according to the default setting (temperature: 50℃; time: 6 hours).
Other settings:
A. Temperature setting:
Users can adjust the temperature according to the type of filaments, ambient temperature, humidity and other factors. In the working state, press the left button to cool down, and the right button to heat up. After the setting is completed, you need to wait 3 seconds to automatically save the settings.
Temperature adjustment range: 35℃～55℃.
The measured temperature is displayed as PV, and the set temperature is shown as SV.
B. Drying time setting:
The default drying time is 6 hours when the machine is turned on, and the drying time can also be set manually. Setting method: When the dryer box is working, press and hold the left button (about 3 seconds) to enter the setting interface, which is displayed as SV Time XXH, press the left button to decrease the time, to press the right one to increase the time. Each press will increase or decrease the time by 1 hour. The setting range is 0~24 hours. After the setting is completed, press the left button (about 3 seconds) to exit, and the dryer box will enter the heating state. After the countdown is completed, the dryer box stops working and enters the dormant standby state.
Note: Set to 0 hour, after confirming the exit, the dryer box will immediately enter the dormant standby mode. In the standby state, press the left or right button to enter the working state, the default time is 6 hours.
C. Checking the drying time:
When the dryer box is in working state, press the left button (about 3 seconds) to view the remaining time of the countdown. After pressing the left button again (about 3 seconds) for exiting, the dryer box enters the heating state.

Dryer Box User Instruction

Turn on the power:
Plug the 24V/2A power adapter that came with the product into a power outlet, and then connect the wire to the DC outlet of the filament dryer box. Before the drying box is powered on, there is no key operation, and the dryer box is in a standby mode (no heating).
Filament drying:
Put the filament into the dryer box and pull the filament cord out of outlet. Close the top cover, press any key(left or right), the dryer box will be heated according to the default setting (temperature: 50℃; time: 6 hours).
Other settings:
A. Temperature setting:
Users can adjust the temperature according to the type of filaments, ambient temperature, humidity and other factors. In the working state, press the left button to cool down, and the right button to heat up. After the setting is completed, you need to wait 3 seconds to automatically save the settings.
Temperature adjustment range: 35℃～55℃.
The measured temperature is displayed as PV, and the set temperature is shown as SV.
B. Drying time setting:
The default drying time is 6 hours when the machine is turned on, and the drying time can also be set manually. Setting method: When the dryer box is working, press and hold the left button (about 3 seconds) to enter the setting interface, which is displayed as SV Time XXH, press the left button to decrease the time, to press the right one to increase the time. Each press will increase or decrease the time by 1 hour. The setting range is 0~24 hours. After the setting is completed, press the left button (about 3 seconds) to exit, and the dryer box will enter the heating state. After the countdown is completed, the dryer box stops working and enters the dormant standby state.
Note: Set to 0 hour, after confirming the exit, the dryer box will immediately enter the dormant standby mode. In the standby state, press the left or right button to enter the working state, the default time is 6 hours.
C. Checking the drying time:
When the dryer box is in working state, press the left button (about 3 seconds) to view the remaining time of the countdown. After pressing the left button again (about 3 seconds) for exiting, the dryer box enters the heating state.

Dryer Box User Instruction

Dryer Box User Instruction

分享至微信

分享至微信