Wire diameter：1.75/3.0MM
Dimensional Accuracy：±0.02MM

Air bubbles：100% Zero Bubble
Net weigh：1KG/Roll

Gross Weight：1.3KG/Roll

Density：1.24g/cm³

Length：1.75MM(1KG)=330M

              3.0MM(1KG)=110M

Melting point：170℃-190℃

Tensile force：9KGF-12KGF

Water absorption：0.50%
Printing temperature：210℃-235℃

Printing speed：50MM/s-100MM/s
Bed temperature：55℃-65℃

Melt index：4-8g/10min(190℃,2.16kg)

（Reference GB/T 3682.1-2018）

Heat deflection temperature：57℃

Elongation at break：45%

(Corporate standard 23℃ Wire diameter 1.75 mm)

1. Environmentally friendly, non-toxic and biodegradable;

2. Bright color;

3. Low shrinkage;

4. High strength and rigidity;

5. Good toughness, not easy to be brittle;

6. 10 times higher toughness than PLA on the market;

7. Smooth printing, and the surface of the finished product is smoother and more delicate.

Applicable to all types of FDM 3D printers, suitable for printing handicrafts, artworks, industrial design samples and product models with higher toughness requirements.